Katharine Edmonds calendar5 October 2020 clock-icon 2 Min

Theorem Solutions are pleased to announce the release of our V23.1 CATIA V5 Multi-CAD to NX product, with a number of new product features and enhancements alongside general updates to improve stability and geometry quality.

Integrated within the CATIA V5 application, V23.1 supports from CATIA V5-6R2017 to CATIA V5-6R2020, as well as NX 11, 12, 1847, 1872 and 1899, providing the user with the highest levels of interoperability with NX file assemblies.

Theorem’s CATIA V5 Multi-CAD to NX Product is based upon the Dassault Systemes XCAD infrastructure, allowing CATIA V5 users to incorporate parts and assemblies from NX, directly within the CATIA environment and removing the need for external translators. The application checks geometry for errors and validates the integrity of the data as it comes into CATIA. The beauty of the Dassault Multi-CAD architecture is the interlinking of the CATIA data and non-native data. 

Using Multi-CAD offers a greater level of security and protection as the link to the source data is a direct link, without the need to leave the application or use 3rd party external applications. This also removes any errors that can occur from working with potentially old and out of date data.

Our unique approach to the challenge of an enterprise level workflow is built from over 25 years of experience with CAD to CAD conversion and PLM data exchange.

Theorem’s solutions are built with development tools and APIs supplied and supported by the major CAD vendors that we have strategic partnerships with. This means we do not reverse engineer and can provide you with a robust application that offers full control over data preparation and optimization for the target formats.

Partnerships with Dassault Systemes and Siemens ensure that there is a parallel development between the latest releases of CATIA V5, NX and Theorem’s Multi-CAD products, allowing Theorem to continue to provide data solutions to the CATIA V5 community.

You can find more information on Multi-CAD here

Evaluation Request

Subscribe to Blog

Leave A Comment

Comment():

YOU MAY ALSO LIKE

New Product Release: CATIA V5 to Creo ...

By:   07, Jun 2021   2 min

We are pleased to announce the release of the latest Lightweight 3D Adapter for CATIA V5 to Creo View users, supporting up to and including CATIA ...

New Product Release: CATIA 3DEXPERIENCE ...

By:   03, Jun 2021   2 min

We are pleased to announce the release of the latest Lightweight 3D CATIA 3DEXPERIENCE to Creo View product, supporting from CATIA 3DEXPERIENCE ...

Extend the reach of your 3DEXPERIENCE ...

By:   17, May 2021   4 min

The latest release of the Theorem suite of products enable you to make the most of your 3DEXPERIENCE data. The updated products resolve the ‘one size ...